|
Page 2 of 2 To minimize the energy loads within and on the structure, it is critical to orient the building to take advantage of cooling breezes and sunlight. Daylighting with ample windows will eliminate the need to turn on electric lights during the day (and provide great views outside too). Passive Solar can warm a building in the winter - but care needs to be taken to provide shade in the summer time to prevent overheating. Prevailing breezes and convection currents can passively cool the building in the summer. Thermal mass stores heat gained during the day and releases it at night minimizing the swings in temperature. Thermal mass can both heat the building in winter and cool it during the summer. Insulation is the final step to optimizing the structure. Well-insulated windows, doors, and walls help reduce energy loss, thereby reducing energy usage. These design features don't cost much money to construct and significantly reduce the energy needed to make the building comfortable.
Optimizing the heating and cooling systems through installing energy efficient machinery, commissioning, and heat recovery is the next step. Compared to optimizing the passive heating and cooling features through design, the gains made by engineering are relatively expensive and can add significantly to the projects cost. However, thoughtful integrated design can reduce costs -- for example, once a building has been designed to be more energy-efficient, it may be possible to downsize heating, ventilation and air-conditioning (HVAC) equipment, leading to substantial savings. To further address energy loss hot water heat recycling is used to reduce energy usage for domestic water heating. Ground source heat pumps are more energy efficient then other forms of heating and cooling.
Finally, onsite generation of renewable energy through solar power, wind power, hydro power, or biomass can significantly reduce the environmental impact of the building. Power generation is the most expensive feature to add to a building.
Good green architecture also reduces waste, of energy, water and materials. During the construction phase, one goal should be to reduce the amount of material going to landfills. Well-designed buildings also help reduce the amount of waste generated by the occupants as well, by providing onsite solutions such as compost bins to reduce matter going to landfills.
To reduce the impact on wells or water treatment plants, several options exist. "Greywater", wastewater from sources such as dishwashing or washing machines, can be used for subsurface irrigation, or if treated, for non-potable purposes, e.g., to flush toilets and wash cars. Rainwater collectors are used for similar purposes.
Green building often emphasizes taking advantage of renewable resources, e.g., using sunlight through passive solar, active solar, and photovoltaic techniques and using plants and trees through green roofs, rain gardens, and for reduction of rainwater run-off. Many other techniques, such as using packed gravel for parking lots instead of concrete or asphalt to enhance replenishment of ground water, are used as well.
|
